Create beautiful fencing without measuring.
Bring your best outdoor design ideas to life with an agile installation system that’s so intuitive it actually makes Do-It-Yourself… doable.
OUTDECO’s Post & Frame Installation System offers two types of fencing channel kits and three sizes of posts. All of them easily configure to help you create a variety of fencing or architectural décor accents.
Kit channels are engineered with slots that align with pre-drilled holes on the posts for attaching without measuring. Easy to plan, assemble, and install.
Channel slots aligned to pre-drilled holes on the posts




Adaptable for fencing or architectural décor



Frame Channels screw directly into pre-drilled holes on OUTDECO Posts.
Channel slots allow for 1″ of vertical adjustment for uneven surfaces.
Channels can also attach to existing walls, fences, and other flat surfaces.




IMAGE ABOVE: 24″ x 48″ Panel Frame Kits on 75″ Posts with BAMBOO Panels in Espresso finish.

Kit includes: 3 sets of Frame Channels, Corner Connectors, Panel Locking Pins, Screws, and a drill bit.

IMAGE ABOVE: 36″ x 72″ Panel Frame Kits on 75″ Posts with 36″ x 72″ STONEWALL Panels in Espresso finish.

Kit includes: 1 set of Frame Channels, Corner Connectors, Panel Locking Pins, Screws, and a drill bit.
Slat Fence Kits are used to construct horizontal fencing.
Slat Spacers create uniform or varied slat spacing without measuring.
A variety of Slat heights can be used for unique designs.
Kits can be combined for fencing that features both Panels and Slats.

72″ Slat Fence Kit
(1 Set of 2 Channels)

24″ Slat Fence Kit
(1 Set of 2 Channels)

Slat Spacers
(Shown single & doubled; 72″ Kit includes 24 Spacers, 24″ Kit includes 8 Spacers.)



Kit includes: 1 set of 72″ Channels, Slat Spacers, Channel Screws, Slat Locking Screws, an optional Brace Strap, and a drill bit.
IMAGE LEFT: 72″ Slat Kits with varied Slat sizes, attached to existing columns with 75″ center Post.

IMAGE ABOVE: 24″ Slat Kits, with varied Slat sizes, combined with 36″ x 72″ Panel Frame Kits, with 36″ x 72″ Botanical panels. The Slat Kit channels are attached to existing columns with a 75″ Post in the center.

Kit includes: 1 set of 24″ Channels, Slat Spacers, Channel Screws, Slat Locking Screws, and a drill bit.

IMAGE ABOVE: 72″ Slat Kit with varied slat spacing. Varied slat spacing may require additional spacers.





24″ Slat Kit includes 8 Spacers. 72″ Kit includes 24 Spacers.
Slat Spacers slide into Channels from the top, and Slats fit into the Spacers.
Stack additional Spacers for increased or varied spacing between Slats in ½” increments.
Additional Spacers in 24-packs are sold separately.
52″ and 75″ Surface-Mount Posts with welded base plates
96″ In-Ground Posts to be set in cement
Galvanized Steel with Black Powder Coating
Pre-drilled post holes align with the slots in all OUTDECO Panel Frame and Slat Fence channels for quick and easy installation with no measuring.
Posts are pre-drilled on 3 sides allowing for linear or 90° corner configurations.




Screws, Post Caps, and Post-Hole Plugs included

Screws, Post Caps, and Post-Hole Plugs included

Post Caps and Post-Hole Plugs included

OUTDECO USA warrants to the original purchaser that our posts and frames will be free of structural faults due to defects in manufacturing for a period not exceeding five years from the date of purchase. This limited warranty does not cover damage resulting from misuse, improper storage or handling, or improper installation.
The OUTDECO Post & Frame Installation system is manufactured and distributed by:
OUTDECO USA | 2045 Corte Del Nogal | Carlsbad, CA 92011 | 760-444-4193